18-952 CMW

Part #: 219-18-952

Request 3D Model

The 950 Series Paddle Holder Assembly is designed for welding in tight spaces. The Paddle Holder can be adjusted in the X and Y direction. The head with a threaded socket only requires 23/32 IN of clearance.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

The diameter of the paddle holder is 1 IN
The shank diameter of the Tee Connector is 0.875 IN
The part holds a Threaded Socket Tip
To reach into difficult spaces the angle of bend angle of both the Paddle Holder and Tee Connector is 30 degrees
The length of the of the Tee Connector shank is 3 IN
The offset range is 3.375 to 5.1 IN
The height range is 2.06 to 3.06 IN

Specifications

RWMA Material Type	RWMA Class 2
Tee Connector Shaft Dia.	0.875
For Electrode Type	Threaded Socket Tip
Barrel Dia.	1.00000
Tee Connector Shank Length	3.000
Unit of Measure	IN
Bend Angle	30.0