Knockout Tube Assembly

CMW Knockout Tube Assembly

The Knockout Tube is designed for use with 200 and 300 Series Straight Holders. The spring loaded tube carries water to the tip and is used to push the tip out of the taper.

The part shouble be selected based on the length of the holder and the taper size.

PartDescription Material For Use With Taper Holder Series Type Overall Length Outside Diameter Unit of Measure
294-18-20095-3  
18-20095-3 CMW Stainless Steel 4RW 200 Series Holder 3.00000 0.37500 IN
294-18-20096-18  
18-20096-18 CMW Stainless Steel 5RW 200 Series Holder 18.00000 0.53000 IN
294-18-20096-58  
18-20096-58 CMW Stainless Steel 7RW 200 and 300 Series Holder 8.00000 0.53000 IN
294-18-20096-62  
18-20096-62 CMW Stainless Steel 7RW 300 Series Holder 12.00000 0.53000 IN
18-20095-3 CMW 18-20096-18 CMW 18-20096-58 CMW 18-20096-62 CMW