• 18-5636  CMW
  • Sketch for 18-5636  CMW

18-5636 CMW

Part #: 235-18-5636

Request 3D Model

Request 3D Model


The 500 Series Offset Holders are available with different offsets and engagement angles to fit any job. The ejector style allows for easy removal of the electrode. The part is nickel plated to resist wear. These holders are commonly used with Rocker Arm and Pedestal Type welders.

RMWA Class 3 material is high strength copper alloy recommended for structural secondary components and electrode holders subjected to high forces. This is a heat treatable alloy used in the fully heat treated condition.

  • The mounting shank length is 4.000 IN
  • The mounting shank diameter is 1.25 IN
  • The part holds a subcomponent via a replaceable 6RW standard taper electrode adapter (Part Number: 290-18-7876) which is suitable for weld forces ranging between 1,500 to 2,000 pounds of force.
  • The offset is 4 IN
  • The engagement angle is 30 Degrees
  • Ejector Type Part
  • The part is nickel plated to protect against corrosion.

Specifications

RWMA Material RWMA Class 3
Shank Diameter 1.25
RWMA Taper 6RW
Offset 4.0000
Shank Length 4.000
Unit of Measure IN
Engagement Angle 30.0
Ejector Type Yes
Adapter Included Yes
Nickel Plated Yes

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov