18-7816 CMW

Part #: 290-18-7816

Request 3D Model

Request 3D Model


Electrode Angle Adapters are used to improve the holder life and flexibility by allowing users to select different angles for tooling setups. The adapter can also be replaced when the taper wears out. The parts are desinged for use CMW Straight Holders.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overall length is 2.563 IN
  • The part width is 1.313 IN
  • The part mounts via 1 - 14 male threads.
  • The part holds a subcomponent via a 6RW standard taper which is suitable for weld forces ranging between 1,500 to 2,000 pounds of force.
  • The offset is 1.438 IN
  • The engagement angle is 30 Degrees
  • The part is nickel plated to protect against corrosion.
  • Ejector Type Part

Specifications

RWMA Material Type RWMA Class 2
Engagement to Holder 1 - 14
RWMA Taper 6RW
Overall Length 2.68800
Offset 1.4380
Thread Length 0.7500
Body Length 1.3130
Body Width 1.31300
Unit of Measure IN
Engagement Angle 30.0
Ejector Type Yes
Adapter Included Yes
O-ring Included Yes
Thread Type Male

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov