18-7863 CMW

Part #: 290-18-7863

Request 3D Model

Request 3D Model

Electrode Adapters are used to improve electrode holder life and flexibility by allowing the adapter to be replaced when the taper wears out.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overall length is 1.750 IN
  • The hex width is 1.250 IN
  • The part mounts via 1 - 14 threads.
  • The part holds a subcomponent via a 6RW standard taper which is suitable for weld forces ranging between 1,500 to 2,000 pounds of force.
  • The taper or thread length is 0.750 IN
  • The part includes an o-ring


RWMA Material Type RWMA Class 2
Engagement to Holder 1 - 14
RWMA Taper 6RW
Overall Length 1.75000
Hex Width 1.25000
Thread Length 0.7500
Body Length 1.0000
Unit of Measure IN
O-ring Included Yes
Thread Type Male

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov