18-7415 CMW

Part #: 290-18-7415

Request 3D Model

Request 3D Model


Electrode Adapters are used to improve electrode holder life and flexibility by allowing the adapter to be replaced when the taper wears out.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overall length is 1.750 IN
  • The hex width is 0.875 IN
  • The part mounts via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
  • The part holds a subcomponent via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The taper or thread length is 0.625 IN

Specifications

RWMA Material Type RWMA Class 2
Engagement to Holder 4RW
RWMA Taper 5RW
Overall Length 1.75000
Hex Width 0.87500
Thread Length 0.6250
Body Length 1.1250
Unit of Measure IN

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov