Part #: 290-18-7742
Request 3D Model
The Tapered Adapter is designed for use with a threaded Nut or Stud Welding electrode and the Cooling Chamber. This allows you to maximize the life of the more expensive 10W faced electrode.
RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.
- The overall length is 1.75 IN.
- The hex width is 1 IN.
- The part mounts via a 5RW taper.
- The part holds a subcomponent via a 5/8 - 18 threads.
- The length of the thread is 0.625 IN.
|RWMA Material Type||RWMA Class 2|
|Engagement to Holder [T]||5RW|
|Overall Length [A]||1.75000|
|Outer Diameter [B]||1.00000|
|Body Length [V]||0.8750|
|Unit of Measure||IN|
|Thread Type [S]||Female|
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov