Non-Piloting Pins

CMW Non Piloting Pins

Non-Piloting Pins are specially designed for use with CMW Non-PIloting Nut Electrodes. When installed in the Non-Piloting Nut Electrode, the pins are spring loaded and position the nut for welding. The pin automatically retracts when the it makes contact with the upper electrode. Each combination of pin and nut weld held is designed for welding a specific nut size.

PartDescription Material Overall Length [A] Base Outside Diameter [B] Pin Pilot Diameter [J] For Nut Size Unit of Measure
278-16-950002-12
16-950002-12 CMW Annodized Aluminum 1.06300 0.54700 0.1660 #12 IN
278-16-950001-04
16-950001-04 CMW Annodized Aluminum 1.00000 0.37500 0.0800 #4 IN
278-16-950001-06
16-950001-06 CMW Annodized Aluminum 1.00000 0.37500 0.0970 #6 IN
278-16-950001-08
16-950001-08 CMW Annodized Aluminum 1.00000 0.37500 0.1270 #8 IN
278-16-950001-10
16-950001-10 CMW Annodized Aluminum 1.00000 0.37500 0.1410 #10 IN
278-16-950001-12
16-950001-12 CMW Annodized Aluminum 1.00000 0.37500 0.1640 #12 IN
278-16-950001-25
16-950001-25 CMW Annodized Aluminum 1.00000 0.37500 0.1920 1/4 IN
278-16-950001-31
16-950001-31 CMW Annodized Aluminum 1.00000 0.37500 0.2570 5/16 (8mm) IN
278-16-950001-M10
16-950001-M10 CMW Annodized Aluminum 1.00000 0.37500 0.3220 10 mm IN
278-16-950001-M6
16-950001-M6 CMW Annodized Aluminum 1.00000 0.37500 0.1840 6 mm IN
278-16-950001-M8
16-950001-M8 CMW Annodized Aluminum 1.00000 0.37500 0.2500 8 mm IN
278-16-950002-25
16-950002-25 CMW Annodized Aluminum 1.06300 0.54700 0.1900 1/4 IN
278-16-950002-31
16-950002-31 CMW Annodized Aluminum 1.06300 0.54700 0.2550 5/16 (8mm) IN
278-16-950002-38
16-950002-38 CMW Annodized Aluminum 1.06300 0.54700 0.3040 3/8 IN
278-16-950002-50
16-950002-50 CMW Annodized Aluminum 1.06300 0.54700 0.4130 1/2 IN
278-16-950002-M10
16-950002-M10 CMW Annodized Aluminum 1.06300 0.54700 0.3180 10 mm IN
278-16-950002-M11
16-950002-M11 CMW Annodized Aluminum 1.06300 0.54700 0.3570 11 mm IN
278-16-950002-M12
16-950002-M12 CMW Annodized Aluminum 1.06300 0.54700 0.3860 12 mm IN
278-16-950002-M6
16-950002-M6 CMW Annodized Aluminum 1.06300 0.54700 0.1860 6 mm IN
278-16-950002-M8
16-950002-M8 CMW Annodized Aluminum 1.06300 0.54700 0.2500 8 mm IN