• 16-3785-M10 CMW
  • Sketch for 16-3785-M10 CMW

16-3785-M10 CMW

Part #: 275-16-3785-M10

Request 3D Model

Request 3D Model


Non-Piloted Nut Electrodes are for welding nuts. The part has an insulated, spring loaded pilot that retracts when it makes contact with the upper electrode which prevents damage.

A refractory metal face is made of RWMA Class 11 (75% tungsten, 25% copper) (ASTM 702 C1D) is brazed onto the base material. This face is typically used for welding at higher pressure and heat common with projection welding.

  • The overall length is 1.500 IN
  • The part mounts via 5/8 - 18 threads.
  • The weld face is 1 IN
  • The part has a spring loaded insulated pilot for welding a 10 mm nut.
  • The diameter of the pin is 0.320 IN
  • The diameter of the pilot is 0.427 IN.

Specifications

Face Refractory Material RWMA Class 11 - 10W
RWMA Material Type RWMA Class 2 - C18200
Engagement to Holder [S] 5/8 - 18
Overall Length [A] 1.50000
Weld Face Diameter [B] 1
Pilot Diameter [J] 0.42700
Pin Diameter [P] 0.3200
Pilot Stickout [L] 0.3750
For Nut Size 10 mm
Refractory Material Thickness [I] 0.250
Unit of Measure IN
Spring Included Yes

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov