Part #: 275-16-3785-25
Request 3D Model
Non-Piloted Nut Electrodes are for welding nuts. The part has an insulated, spring loaded pilot that retracts when it makes contact with the upper electrode which prevents damage.
A refractory metal face is made of RWMA Class 11 (75% tungsten, 25% copper) (ASTM 702 C1D) is brazed onto the base material. This face is typically used for welding at higher pressure and heat common with projection welding.
- The overall length is 1.500 IN
- The part mounts via 5/8 - 18 threads.
- The weld face is 1 IN
- The part has a spring loaded insulated pilot for welding a 1/4 nut.
- The diameter of the pin is 0.192 IN
- The diameter of the pilot is 0.283 IN.
|Face Refractory Material||RWMA Class 11 - 10W|
|RWMA Material Type||RWMA Class 2 - C18200|
|Engagement to Holder [S]||5/8 - 18|
|Overall Length [A]||1.50000|
|Weld Face Diameter [B]||1|
|Pilot Diameter [J]||0.28300|
|Pin Diameter [P]||0.1920|
|Pilot Stickout [L]||0.3750|
|For Nut Size||1/4|
|Refractory Material Thickness [I]||0.250|
|Unit of Measure||IN|
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov