Home Resistance Welding Spot Welding Electrodes

Resistance Welding / Spot Welding Electrodes

Download the entire Welding Products Catalog (PDF 30MB)

CMW’s electrodes are cold-formed creating properties superior to those obtained by casting or hot forging methods.  Cooling tubes can be supplied for many electrodes depending upon the application.  These extra values assure you of longer electrode life, longer runs between dressings and highest weld quality. 

---

 

Straight Electrodes

Dome and Pointed Nose Flat and Offset Nose Radius, Truncated and 30O Nose Elkon® and Elkonite® Faced Nose

 

Single-Bend Electrodes

Cold formed from full hard straight electrodes CMW®3 material is standard CMW®28 material available by special order

 

Double-Bend Electrodes

Cold formed from full hard straight electrodes Superior properties to those of cast or hot forged CMW®3 material is standard CMW®28 and CMW®100 material available by special order

 

Crank Electrodes

Cold formed and cast options available Bent and offset for hard to reach locations CMW®3 material is standard CMW®28 and CMW®100 material available by special order

 

Spade Electrodes

Cold formed from full hard straight electrodes CMW®3 material is standard CMW®28 and CMW®100 material available by special order

 

Gun Electrodes

Cold formed and cast options available CMW®3 material is standard CMW®28 and CMW®100 material available by special order

 

Chameleon / Max-Life® Nut and Stud Welding

Precision pin or sleeve type assemblies CMW®3 base material is standard Ceramic coated stainless steel pins Elkonite faced caps

 

Self-Piloting Nut Welding Electrodes

Elkonite®10W3 faced CMW®3 material Insulated, anodized aluminum pins 55 HRC heat treatment for wear resistance

 

Non-Piloting Nut Welding Electrodes

Elkonite®10W3 faced CMW®3 material Insulated, anodized aluminum pins 55 HRC heat treatment for wear resistance

 

Stud Welding Electrodes

Elkonite®10W3 faced CMW®3 material Insulated, anodized aluminum pins 55 HRC heat treatment I.D and O.D. for wear resistance

 

Back-Up Electrodes

Swivel head, flat faced and square or rectangular faded options CMW®3 shank & cap material is standard CMW®100 cap material and Elkonite® or Elkon® facing material available by special order

 

Threaded Electrodes

CMW®3 male & female electrodes available Elkonite® faced male & female electrodes available Flat, truncated or centered options

 

Adapters

Male to female or female to female options Standard lengths up to 2 1/8” (longer available upon request) Both pipe and straight thread available